Biosimilar development and regulation in Japan

Abstract:
In Japan, biosimilars guidelines following the principles of the EU framework were established by Japan’s Ministry of Health, Labor and Welfare in March 2009. The guidelines cover the manufacturing process, characterization of quality attributes, and clinical and non-clinical studies for biosimilars. In this paper, the requirements for regulatory approval of biosimilars in Japan are outlined.

In Japan, a biosimilar product is defined as a biotechnological drug product developed by a different company, which is comparable to an approved biotechnology-derived product (reference product) of an innovator company [1, 2].

Biosimilars may be recombinant proteins and polypeptide products, their derivatives, and products of which they are components, e.g. conjugates. Biosimilars are proteins and polypeptide products produced from recombinant expression systems using micro-organisms or cultured cells and that can be highly purified and well-characterized using an appropriate set of analytical procedures.

A biosimilar product can generally be developed on the basis of data that demonstrates the comparability between the biosimilar product and the reference product with respect to quality, safety and efficacy, or other relevant data, see Figure 1.

The reference products should be drugs approved in Japan and be the same product throughout the development period of the biosimilar products.

Manufacturing process

It should be established that the manufacturing process for the biosimilar is highly consistent and robust. If the host cell line used for the production of the reference product is disclosed by the innovator company, it is preferred that the same cell line is used. The cell banks should be established and characterized following ICH Q5A, Q5B and Q5D guidelines. The manufacturing processes should be adapted to improve the safety of the biosimilar, as long as this does not affect efficacy [1].

Quality characterization

The biosimilar should be fully characterized using state of the art analytical methods, and should include:

1) structural characterization
2) physicochemical properties
3) biological activity
4) immunological properties
5) impurities

Formulation

The dosage form and route of administration of the biosimilar product should be the same as that of the reference product. However, it is not essential for the biosimilar product to have the same formulation as the reference product, provided that the safety and efficacy are not affected.

Stability

Long-term, real-time, real-condition stability studies following the ICH Q5C guideline are required. The expiry date for the biosimilar product should be determined based on data from real-time/real-temperature studies. A comparison of stability with the reference product will not necessarily be required. Accelerated and stress stability studies are recommended to obtain useful data for evaluating the properties of the biosimilar product.

Comparability studies on quality attributes

In addition to elucidating the quality attributes of the biosimilar, comparability exercises comparing quality attributes between the biosimilar and the reference product should be conducted [1].

Non-clinical studies

Non-clinical studies that can ensure the safety for administration to humans should be performed and completed prior to initiation of clinical studies.

Both comparability and individual assessments are applicable, depending on the purpose of the study.

Pharmacokinetics
It is useful to compare the non-clinical pharmacokinetics in some glycoproteins.

Pharmacological studies
Comparability of the pharmacological action should be directly evaluated.

Toxicity studies

Clinical studies

Where the data from quality characterization and non-clinical studies is insufficient to demonstrate comparability with the reference product clinical studies are required. Clinical studies should be designed based on the data from quality characterization, non-clinical studies and comparability studies [1].

It is necessary to carry out comparability studies between the biosimilar and the reference product for pharmacokinetic, pharmacodynamic, efficacy and safety parameters.

Where comparability has been demonstrated through clinical pharmacokinetic, pharmacodynamic or pharmacokinetic/pharmacodynamic studies, further clinical studies may be reduced in some cases. In general, a well-designed crossover study should be considered in order to evaluate the comparability between the biosimilar and the reference product. However, a crossover study may not be suitable for long half-life products or products which may cause formation of antibodies.

Competing interests:None.

Provenance and peer review: Article prepared based on extensive research, internally peer reviewed.

Michelle Derbyshire, PhD, GaBI Online Editor

References
1. Arato T. Recent regulations of biosimilars in Japan. Pharmaceuticals and Medical Devices Agency. 47th Annual Meeting, DIA 2011; 2011 Jun 19–23, Chicago, USA.
2. Arato T. Regulatory guidelines for biosimilars in Japan. 10th EGA International Symposium on Biosimilar Medicines; 2012 April 20; London, UK.

Disclosure of Conflict of Interest Statement is available upon request.

Copyright © 2013 Pro Pharma Communications International

Permission granted to reproduce for personal and non-commercial use only. All other reproduction, copy or reprinting of all or part of any ‘Content’ found on this website is strictly prohibited without the prior consent of the publisher. Contact the publisher to obtain permission before redistributing.

Source URL: https://gabi-journal.net/biosimilar-development-and-regulation-in-japan.html


Generics and Biosimilars Initiative (GaBI)
Tel: +32 474989572 | Fax: +32 14 583 048